Liaoning MEC Group Co. Ltd

Model Number: Customed beer fermenter-101 Brand Name: Longem. Key Specifications/Special Features: Typical specifications of uni-tank fermenters with capacities less than 100hl are as the followings:Max working pressure: 2 barsDesign pressure: 3 barsConstruction:

At least 25% excess headspace

Vertical cylinder and cone bottom shape

Dished top head (3mm thick S.S.304 sheets)

60 cone bottom

Inside side and bottom finish: 3mm thick S.S.304 sheets, 2B quality original surface, welds polished to 2B quality, pickled

Dimpled glycol jackets on side and bottom: 1.5mm thick S.S.304 sheets

Insulation: 70mm thick polyfoam jackets on the side and bottom

Cladding finish: 2mm thick S.S.304 sheets, frosted surface

2 lifting eyes on the top head for convenient moving

4 complete S.S.304 legs with adjustable footpads and horizontal cross bracing

Side mounted S.S.304 fabricated swing-in and lift-out ellipse manway with fastening handle

Fittings:

• All of them are adopted and installed according to professional design for customer's convenient operation
• Thermo-well: pocket (S.S.316) and boss (aluminum alloy, powder sprayed)
• PT100 thermal sensor interlock with solenoid valve on the glycol inlet
• One rotating sanitary S.S.304 CIP spray ball on inner head with down-tube and fittings integrated (Tri-clamp 1")
• Butterfly valve (Tri-Clamp 1.5") on the CIP down-tube
• One sampling cock placed on lower place of the side (Tri-clamp 1" connecting)
• Manometer
• Breathing valve for pressure relief and Anti-vacuum: fixed relief pressure, e.g. 2 bars, Sanitary, S.S.304 fabricated, mounted on the top head
• 1 sanitary manual butterfly valve (Tri-Clamp 1.5") on the bottom of the cone part for wort inlet, beer outlet, cropping yeasts and drainage
• 1 sanitary manual butterfly valve (Tri-Clamp 1.5") on the side of cone for beer outlet
• Convenient removable design: installation of all fittings designed for operators' convenience of external assembly/disassembly for cleaning and replacing purpose and more